Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #19: Thu Sep 21 01:52:58 CEST 2000
    root@iskandar:/usr/src/sys/compile/ISKANDAR
Timecounter "i8254"  frequency 1193154 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (547.16-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,XMM>
real memory  = 268369920 (262080K bytes)
avail memory = 257351680 (251320K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03dc000.
VESA: v2.0, 2048k memory, flags:0x0, mode table:0xc036afe2 (1000022)
VESA: Cirrus Logic GD-5480 VGA
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443GX host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on pci1
pci2: <PCI bus> on pcib3
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x3000-0x30ff mem 0xf4200000-0xf4200fff irq 20 at device 4.0 on pci2
ahc0: aic7892 Wide Channel A, SCSI Id=7, 16/255 SCBs
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x2800-0x287f mem 0xf4104000-0xf410407f irq 19 at device 9.0 on pci0
xl0: Ethernet address: 00:50:da:47:94:23
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem 0xf4100000-0xf4100fff irq 19 at device 12.0 on pci0
ahc1: aic7896/97 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc2: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 19 at device 12.1 on pci0
ahc2: aic7896/97 Wide Channel B, SCSI Id=7, 16/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2880-0x28bf mem 0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 21 at device 14.0 on pci0
fxp0: Ethernet address 00:90:27:8d:41:bf
pcm0: <AudioPCI ES1371> port 0x28c0-0x28ff irq 16 at device 16.0 on pci0
isab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x2c20-0x2c2f at device 18.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2c00-0x2c1f irq 21 at device 18.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: Logitech, Inc. QuickCam Pro, rev 1.00/1.00, addr 2
intpm0: <Intel 82371AB Power management controller> port 0x1040-0x104f irq 9 at device 18.3 on pci0
intpm0: I/O mapped 1040
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped c00 
pci0: <Cirrus Logic GD5480 SVGA controller> at 20.0
pcib1: <Intel 82443GX host to AGP bridge> on motherboard
pci3: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 flags 0x30 on isa0
sio1: type 16550A, console
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
joy0 at port 0x201 on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
DUMMYNET initialized (000608)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
IPv6 packet filtering initialized, unlimited logging
SMP: AP CPU #1 Launched!
ad0: 26105MB <IBM-DPTA-372730> [53040/16/63] at ata0-master using UDMA33
Waiting 5 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <HP C1537A L706> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 32)
da0 at ahc1 bus 0 target 12 lun 0
da0: <QUANTUM ATLAS 10K 9WLS UC81> Fixed Direct Access SCSI-3 device 
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 8759MB (17938986 512 byte sectors: 255H 63S/T 1116C)
Mounting root from ufs:/dev/da0s1a
cd1 at ahc0 bus 0 target 4 lun 0
cd1: <PLEXTOR CD-R   PX-W124TS 1.01> Removable CD-ROM SCSI-2 device 
cd1: 10.000MB/s transfers (10.000MHz, offset 8)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <PLEXTOR CD-ROM PX-40TS 1.10> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: cd present [327781 x 2048 byte records]